Epoxy Flake Flooring in Irving, TX

What makes a flake floor

A flake floor is a layered coating system in which small chips of colored vinyl are spread across a wet epoxy base coat. Once the base cures, loose chips are scraped and vacuumed away, and a clear topcoat locks the rest in place. The result is a speckled, terrazzo-like surface with gentle texture that is easy to clean and good at hiding everyday dust and small imperfections in the slab.

Flake systems are our most popular choice for garages because they combine durability, appearance and traction. They also work well in laundry rooms, mudrooms, locker rooms, break rooms, veterinary clinics and light-duty commercial spaces where a decorative but practical finish is needed.

Full broadcast versus partial

In a full broadcast, chips are spread until the base coat is completely covered. This creates a dense, uniform look and the strongest system, since the flake layer adds thickness. Partial broadcast uses fewer chips scattered over a solid base color, producing a cleaner, more modern appearance with more of the background showing. Full broadcast tends to hide dirt and wear better, while partial broadcast shows off the base color. We bring samples of both so you can compare.

Preparation still matters most

No matter how attractive the chips are, a flake floor is only as durable as the bond beneath it. We diamond grind the slab to open its surface, remove any old coatings or sealers, repair cracks and pitting, and vacuum thoroughly before priming. Older floors with heavy oil contamination may need additional degreasing and spot grinding. Skipping these steps is the main reason cheaper flake floors chip or peel within a year or two.

Color selection

Flake blends come in sizes from small to large chips and in color mixes ranging from neutral grays to warm earth tones and bold combinations. Light blends brighten dark spaces, while medium and darker blends hide tire marks and red dust. Many clients choose colors that complement cabinetry, brick or siding. We encourage you to see samples on-site, because the same blend can look quite different under fluorescent tubes, LED shop lights or sunlight from an open door.

The topcoat

We finish flake floors with a clear polyaspartic or aliphatic polyurethane topcoat. These materials resist yellowing from sunlight, which is important in garages that are left open or have windows. They also hold up well to chemicals such as gasoline, oil and many cleaners. Topcoat texture can be adjusted: a smoother finish is easier to mop, while added aggregate provides more grip for wet areas or ramps.

Where flake works well

• Residential garages and carport conversions
• Laundry rooms and mudrooms
• Gym and locker room floors
• Break rooms and employee areas
• Pet grooming and veterinary spaces
• Light-duty storage and workshop areas

Durability and lifespan

A properly installed flake system with a quality topcoat can last many years in a residential garage. Wear usually shows first as dulling in traffic lanes, and the floor can be refreshed with a new topcoat without redoing the entire system. In commercial spaces, lifespan depends on traffic and cleaning methods, and we discuss realistic expectations up front.

Maintenance

Sweep or dust mop regularly, and wash with warm water and a mild cleaner. A soft deck brush helps clean the texture. Avoid harsh acids and strong solvents. Put pads under jack stands and kickstands to prevent point loading.

Common questions

Ready for a flake floor?

Request a free estimate and we will bring samples to your property.